Sign In | Join Free | My fazendomedia.com
China Changzhou Bextreme Shell Motor Technology Co.,Ltd logo
Changzhou Bextreme Shell Motor Technology Co.,Ltd
Professional BLDC motor products manufacturer and solution supplier!
Verified Supplier

4 Years

Home > Automotive Electric Water Pump >

PWM Control 24VDC Communication Base Station ICT Cooling System Water Pump

Changzhou Bextreme Shell Motor Technology Co.,Ltd
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

PWM Control 24VDC Communication Base Station ICT Cooling System Water Pump

  • 1
  • 2
  • 3

Brand Name : OWO

Model Number : OWP-BL43-450T

MOQ : 1 sets

Payment Terms : L/C, T/T

Supply Ability : 500sets/day

Delivery Time : 5days

Rated Voltage : 24V

Max flow : 9000L/H

Max head : 11M

Rated flow rate : 6000L/H,H=8M

Principle of pump : Centrifugal pump

Stage : Single stage

Contact Now

PWM Control 24VDC Communication Base Station ICT Cooling System Water Pump

OWP-BL43-450T SERIES brushless DC electric water pump
6000L/H,H=8M 24V DC electric water pump with PWM control,brushless motor pump,fuel cell pump,coolant pump,centrifugal pump

Boosting/circulation/Variable-frequency/Low-noise/centrifugal BLDC pump
PWM control/Fault diagnosis

Contact us for technical support!!!!


PWM Control 24VDC Communication Base Station ICT Cooling System Water Pump




■ Applications

Widely used in hybrid bus, hybrid passenger car, Fuel Cell Vehicle,electric vehicles, trains, ships and other heating and cooling circulation system.

■ Features
◆ Centrifugal pump
◆ Magnetic force transmission
◆ High efficiency brushless DC motor, low power consumption, high efficiency, long service life.
◆ With wide range operating temperature
◆ PWM signal speed controlling
◆ Diagnostic signal output
◆ With constant flow controlling
◆ Reverse polarity protection
◆ Dry running protection
◆ Over Voltage, over current protection
◆ Overload, over temperature protection

■ Technical description (related parts in contact with the liquid)
Pump head housing: Die casting aluminum alloys
Impeller: PPS+GF
Shield cavity: PPS+GF
Shaft sleeve: carborundum composite materials
Shaft: stainless steel(3CR14) shaft
Magnet housing: PPS plastic capsulation
Seal ring: EPDM
EMC: Grade 3
Noise:≤61dB

■ Driving device (Including motor)
Driving rotor: PPS plastic capsulated magnet
Screws and nuts: SUS 304 stainless steel
Driving Motor : brushless DC motor
Motor wire frame :PPA GF
Pump housing: Die-casting aluminum case with sandblasting and anodizing +PE powder coating..

Bracket: steel
Bracket hoop: US 304 stainless steel
Waterproof based on IP68 rating (en60529)
Connector model: AMP282106-1 (matched Plug AMP282088-1)
Nozzle diameter:38mm (1.5 inch)






■ Temperature parameter
Medium liquid temperature: -40℃ to +85℃ (-40°F to + 185°F)
Working ambient temperature: -40℃ to +120℃ (-40°F to +248°F)
Storage temperature: -40℃ to +70℃ (-40°F to +158°F)
(up to 100 ℃, but it will shorten the service life)
System pressure
-0.2 to 2.5 bar ( 100℃ (212°F).
The service life is more than 20,000 hours based on the rated voltage and 36℃(86°F) ambient temperature.
Voltage range
Rated 24V water pump, workable range 18V - 32V
Although the motor can be used in a wide range of voltage and temperature, but excessive or too low voltage and temperature will affect the service life of the motor, the pump can not be exposed to thermal radiation ambient.

Medium liquid: liquid mixture (Water with below 60% glycol)

Working Voltage
(VDC)

Rated power
(W)

Rated flow
(L/H)

Dimensions
(mm)

Weight
(g)

18V-32V(24V) 250W Q=6000L/H, H=8m 195*90*145 2200g







Electrical parameter

Connector model and the corresponding electrical properties (see figure 3):

AMP282106-1 1( Black) 2( Yellow) 3(Blue) 4(Red)
(matched Plug AMP282088-1) GND Fault feedback PWM +24V






PWM character

PWM Control 24VDC Communication Base Station ICT Cooling System Water Pump



Duty Cycle Description

Remark:
1:PWM duty cycle metrical error ±2%
2:PWM voltage:24VDC, frequency:1 KHz
3: Recommended PWM frequency:500Hz
4: Recommended 0% duty as PWM disconnect

0%≤duty≤10% PWM mode (stop)
11%≤duty≤55% PWM mode (Min speed)
51%≤duty≤90% PWM mode (Linear speed control range)
91%≤duty≤100% PWM mode (Max speed)

Wire dia. The longest wire used *
24V
1.5 mm² 16m
2.5 mm² 25m
3 mm² 31m
4 mm² 40m








Recommended Wire size is (Based on 3% voltage drop)
* The length of the wire means the distance from pump to the battery



Attentions
1. Working ambient temperature:-40℃--120℃, should try to avoid close to three-element catalytic, gas discharge pipe system and engine during the installation, ensure the working environment temperature.
2. The installation position of the water pump should as much as possible close to the low water level , to extend the service life of the pump.
4. Please use the pump far from the dusty environment, the dust is harmful to reduce the service life
5. Pay attention to the purity of the water, avoid to jam and impeller-blocked to reduce the service life of pump

Performance parameter
PWM Control 24VDC Communication Base Station ICT Cooling System Water Pump

External dimension

PWM Control 24VDC Communication Base Station ICT Cooling System Water Pump

PWM Control 24VDC Communication Base Station ICT Cooling System Water Pump


Product Tags:

ICT Cooling System Water Pump

      

24VDC Cooling System Water Pump

      

PWM Control Electric Water Pump

      
Best PWM Control 24VDC Communication Base Station ICT Cooling System Water Pump wholesale

PWM Control 24VDC Communication Base Station ICT Cooling System Water Pump Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Changzhou Bextreme Shell Motor Technology Co.,Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)